2'' x 1'' SCH10S x SCH40S BE/PE Swage Nipple ASTM B861 GR2 Titanium
Outlet’s: 1/2” to 24” in 3000 LBS, 6000 LBS, 9000 LBS available with NACE MR
Stainless Steel Sockolet
Standard: ASTM / ASME A/SA 182
Grade: F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L,
316LN, 317, 317L, 321, 321H, 347, 347H, 904L.
Swage Nipples Definition:
A pipe nipple is a length of straight pipe with male threads on
both ends. It is one of the most popular category of pipe fittings.
It is a connector or a coupling threaded on both ends. PBE Pipe
nipples are used to allow plumbing to be connected to a water
heater or other plumbing. They are used to fit straight end hose or
pipe. A combination of pipe nipples are recommended for
low-pressure discharge and suction service for various compatible
liquids and not for compressible products like air, nitrogen or
Swage nipples are often used in small diameter pipe systems, and
are similar to butt weld reducers. They are concentric and
eccentric available, with various ends. The most common types are:
PBE nipple = Plain Both Ends
BBE nipple= Beveled Both Ends
TBE nipple= Treaded Both Ends
Titanium usage in different:
CP grade1 can be used in the deep drawing parts for its good
elogation and excellent corrossion-resistance.
CP grade2 is widely used in the commercially pure Titanium.
CP grade3 is almost only used in the pressure vessel.
CP grade4 can be used in some fittings and fastening pieces,but for
complete shape need 300 degree celsius to form
Alloy Gr5 ,Ti6AL4V,is one of the most popular Ti alloys because of
mechanical,physical and chemical properties.
Alloy Gr7,add little palladium in cp Titanium and it has the most
Alloy Gr9,Ti3AL2.5v,is used mostly in the golf clubs and bicycle
Alloy Gr12,it has the similar properties with the grade7.
TItanium tube process:
Titanium sponge→Compacting electrodes→Melting→Foring→Bar billets→
Standard: ASTM / ASME A/SA 182
Grade: F44, F45, F51, F53, F55, F60, F61
Standard: ASTM A105/A694/ A350 LF3/A350 LF2.
Grade: F42, 46, 52, 56, 60, 65, 70
Standard: ASTM A182
Grade: F1, F5, F9, F11, F22, F91
Standard: ASTM / ASME SB 61, 62, 151, 152.
Grade: UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640
Titanium Alloy Steel Pipe Fittings
ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220,
BS1560-3.1, API7S-15, API7S-43, API605, EN1092
Stainless steel:ASTM/ASMES/A182F304 | F304L |F304H | F316 | F316L | F321 | F321H |
F347|316Ti | 309S |310S |409|410 | 410S | 416 | 420 | 430 | 630 |
660 | 254SMO | 253MA | 353MA
Nickel Alloy: ASTM/ASME S/B366 UNS N08020| N04400|N06600| N06625| N08800|
N08810|N08825| N10276|N10665|N10675|Incoloy 800 | Incoloy 800H |
Incoloy 800HT | Incoloy 825 | Incoloy 901 | Incoloy 925 | Incoloy
926, Inconel 600 | Inconel 601 | Inconel 625 | Inconel 706 |
Inconel 718 | Inconel X-750, Monel 400 | Monel 401 | Monel R 405 |
Monel K 500
Super Stainless Steel: ASTM/ASME S/A182 F44, F904L, F317LS32750 | S32760
Nimonic: Nimonic 75 | Nimonic 80A | Nimonic 90
Duplex Steel: ASTM A182 F51 | F53 | F55, S32101 | S32205|S31803 | S32304
Alloy Steel: ASTM/ASME S/ A182 F11 | F12 | F22 | F5 | F9 | F91
Ti alloy:ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6
|R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5
Carbon steel: API 5L...
Supply Logo + Standard + Size(mm) + HEAT NO +or as your requirement
Chemical Component Analysis, Mechanical Properties, Metallurgical
Analysis, Impact Testing, Hardness testing , Ferrite Testing,
Intergranular corrosion testing, X-ray Inspection (RT), PMI, PT,
UT, HIC & SSC test, etc. or as your requirment
API, ISO, SGS, BV, CE, PED, KOC, CCRC, PDO, CH2M HILL and etc.
Ø EN 1.4835 has a good weldability and can be welded using the
Shielded metal arc welding (SMAW)
Gas tungsten arc welding, GTAW (TIG)
Plasma arc welding (PAW)
Gas metal arc GMAW (MIG)
Submerged-arc welding (SAW)
Typical application areas for 1.4835:
Common titanium material